Final Drive & Driveshaft

Displaying 1 to 7 (of 7 products)

Product Image	Item Name-	Price
	FINAL DRIVE SLOTTED NUT TOOL - /5 & LATER AIRHEADS For all airheads 1970-1995 except R100GS. Used to remove the nut with the four slots that holds the oil seal and the pinion gear in place in the...	$39.00 Add:
	/5 & LATER PIN SET - SLOTTED NUT TOOL If you have or have ordered the /2 final drive slotted nut tool you can just purchase this pin set to allow the tool to work on 1970 and later...	$13.00 Add:
	41mm SOCKET for FINAL DRIVE SLOTTED NUT TOOL 1/2" drive impact socket for driving the slotted nut tool.	$34.00 Add:
	FINAL DRIVE PINION GEAR HOLDER Used to keep the pinion gear from rotating while unscrewing the pinion nut. For 1955 to 1995 airheads. Made from case hardened cold rolled steel....	$37.00 Add:
	DRIVESHAFT U-JOINT BOLT TORQUE WRENCH ADAPTOR BMW specifies a torque figure for the twelve sided bolts that hold the drive shaft universal joint onto the output flange of the transmission, but a...	$21.00 Add:
	DRIVESHAFT COUPLING PULLER 1955-1980 This removes the piece that couples the drive shaft to the final drive so that you can remove the drive shaft from the swingarm. Replaces Matra 508...	$84.00 Add:
	DRIVESHAFT COMPRESSOR - POST 1980 Used to compress the spring on the rubber band drive shafts. BMW started to use them about September of 1980. Replaces BMW tool number 26 1 700. The...	$43.00 Add: