FINAL DRIVE SLOTTED NUT TOOL - /2 (1955 to 1969)

For /2's 1955-1969 and R66 R51/2 R51/3 R67 R68 but not R26 R27
Used to remove the nut with the four slots that holds the oil seal and the pinion gear in place in the final drive. You will need a 1 5/8” (41mm) socket wrench to use with this tool, the same size socket used on the bolt that holds the flywheel onto the crankshaft on the /2.
Instructions are included for strapping the final drive to the wheel so you can remove the pinion nut, or you can get a pinion gear holder below.