|
Add:
|
STEEL PARALLELS
Model:
Price: $15.00
Weight: 2.5lbs
Date Added: Thursday 17 June, 2010
|
|
Set of two 1/2 inch steel parallels, 6 inches long. Set these on your transmission cover to measure bearing recess depth and on your transmission ... more info |
|
Add:
|
STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS
Model:
Price: $119.00
Weight: 4.5lbs
Date Added: Friday 19 February, 2010
|
|
Includes both the outer race and inner race steering head bearing pullers, plus everything you need to reinstall the races in the frame and the ... more info |
|
Add:
|
STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS
Model:
Price: $62.00
Weight: 2lbs
Date Added: Friday 19 February, 2010
|
|
For removing the steering head bearing from the triple tree. Bottom piece is machined from a heat treated steel alloy. This is a tough tool made for ... more info |
|
Add:
|
STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER
Model:
Price: $62.00
Weight: 1.75lbs
Date Added: Friday 19 February, 2010
|
|
Pulls the steering head bearing outer race from the frame. Works on virtually all BMW's since 1970 with 320/28 bearing. Split ring is made of steel ... more info |
|
Add:
|
SWING ARM & TELESCOPIC FORK PIN WRENCH
Model:
Price: $21.00
Weight: 0.4lbs
Date Added: Thursday 08 April, 2010
|
|
This tool adjusts the rear swingarm pivot pins on /2’s (replaces Matra 513). It will also remove the front fork filler caps on US/2's /5 /6 and /7 ... more info |
|
Add:
|
SWING ARM SEAL - 1955 to 1969
Model:
Price: $6.00
Weight: 0.03lbs
Date Added: Thursday 11 March, 2010
|
|
Swing arm seal for up to 1955 to 1969 singles & twins - ground steel outside diameter so as not to pop out during greasing |
|
Add:
|
SWING ARM SEAL - 1970 to 1980
Model:
Price: $6.00
Weight: 0.03lbs
Date Added: Monday 01 March, 2010
|
|
Swing arm seal for up to 1980 airheads - ground steel outside diameter so as not to pop out during greasing |
|
Add:
|
SWINGARM BEARING PULLER - 1955 to 1984
Model:
Price: $43.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Removes and installs the outer race and stock grease seal of the front (1955-69 Earles) and rear (1955-1984) tapered roller bearings used on all dual ... more info |
|
Add:
|
SWINGARM LOCKNUT SOCKET
Model:
Price: $24.00
Weight: 0.3lbs
Date Added: Friday 19 February, 2010
|
|
There is not enough space for a conventional socket to loosen/tighten the swingarm pivot pin locknut, and the tool provided in the toolkit won’t ... more info |
|
Add:
|
THREADED MIRROR INSERT
Model:
Price: $13.00
Weight: 0.01lbs
Date Added: Monday 01 March, 2010
|
|
Aluminum insert to repair the stripped clutch housing on /5 and some /6 bikes. Inside threads are 10mm x 1.5 left hand (same as your original ... more info |
|
