|
Add:
|
STEERING HEAD INNER RACE PULLER - 1970-1995 AIRHEADS
Model:
Price: $62.00
Weight: 2lbs
Date Added: Friday 19 February, 2010
|
|
For removing the steering head bearing from the triple tree. Bottom piece is machined from a heat treated steel alloy. This is a tough tool made for ... more info |
|
Add:
|
STEERING HEAD OUTER RACE BEARING PULLER- BMW's 1970 and LATER
Model:
Price: $62.00
Weight: 1.75lbs
Date Added: Friday 19 February, 2010
|
|
Pulls the steering head bearing outer race from the frame. Works on virtually all BMW's since 1970 with 320/28 bearing. Split ring is made of steel ... more info |
|
Add:
|
PIN SET - /6 /7 FORK THREADED RINGS
Model:
Price: $7.00
Weight: 0.1lbs
Date Added: Friday 19 February, 2010
|
|
If you purchased the fork cap pin wrench you can replace the threaded pins in that tool with these so that you can remove/install the threaded rings ... more info |
|
Add:
|
FORK CAP PIN WRENCH
Model:
Price: $22.00
Weight: 0.4lbs
Date Added: Friday 19 February, 2010
|
|
This tool removes the front fork filler caps on US/2's /5 /6 and /7 and the threaded rings used in the bottom of the /2 and some /5 telescopic forks. ... more info |
|
Add:
|
SWINGARM LOCKNUT SOCKET
Model:
Price: $24.00
Weight: 0.3lbs
Date Added: Friday 19 February, 2010
|
|
There is not enough space for a conventional socket to loosen/tighten the swingarm pivot pin locknut, and the tool provided in the toolkit won’t ... more info |
|
Add:
|
SWINGARM BEARING PULLER - 1955 to 1984
Model:
Price: $43.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Removes and installs the outer race and stock grease seal of the front (1955-69 Earles) and rear (1955-1984) tapered roller bearings used on all dual ... more info |
|
Add:
|
WHEEL BEARING ADJUSTING KIT - 1970 & LATER AIRHEADS
Model:
Price: $25.00
Weight: 0.15lbs
Date Added: Friday 19 February, 2010
|
|
Enough pieces to set the bearing preload on one wheel. For bikes with 17mm axle. Also applicable to single cylinder bikes. Includes a 6.25mm wedding ... more info |
|
Add:
|
WHEEL BEARING ADJUSTING KIT - 1955-1969 TWINS
Model:
Price: $20.00
Weight: 0.15lbs
Date Added: Friday 19 February, 2010
|
|
Includes all the pieces necessary to set the bearing preload on one wheel. |
|
Add:
|
HUB NUT REMOVER - SINGLE CYLINDER BIKES
Model:
Price: $54.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Pin wrench that will remove the hub nut from any single cylinder bike, R24 thru R27. It's designed to work even when some bozo has gouged those four ... more info |
|
Add:
|
HUB NUT REMOVER - PRE /2
Model:
Price: $51.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Pin wrench that will remove the hub nut from pre-/2 motorcycles (R51/3 for example) to allow re-greasing of the wheel bearings. It's designed to work ... more info |
|
