|
Add:
|
DRIVESHAFT COUPLING PULLER 1955-1980
Model:
Price: $84.00
Weight: 2.5lbs
Date Added: Thursday 25 February, 2010
|
|
This removes the piece that couples the drive shaft to the final drive so that you can remove the drive shaft from the swingarm. Replaces Matra 508 ... more info |
|
Add:
|
FINAL DRIVE PINION GEAR HOLDER
Model:
Price: $37.00
Weight: 0.4lbs
Date Added: Thursday 25 February, 2010
|
|
Used to keep the pinion gear from rotating while unscrewing the pinion nut. For 1955 to 1995 airheads. Made from case hardened cold rolled steel. ... more info |
|
Add:
|
41mm SOCKET FOR SLOTTED NUT TOOL
Model:
Price: $34.00
Weight: 1.5lbs
Date Added: Thursday 25 February, 2010
|
|
1/2" drive impact socket for driving the slotted nut tool. |
|
Add:
|
/2 PIN SET - FINAL DRIVE SLOTTED NUT TOOL
Model:
Price: $13.00
Weight: 0.1lbs
Date Added: Thursday 25 February, 2010
|
|
This pin set will allow the /5 & later slotted nut tool to be used on 1955-1969 /2's. The /2 slotted nut tool comes with this pin set so if you've ... more info |
|
Add:
|
/5 & LATER PIN SET - SLOTTED NUT TOOL
Model:
Price: $13.00
Weight: 0.1lbs
Date Added: Thursday 25 February, 2010
|
|
If you have or have ordered the /2 final drive slotted nut tool you can just purchase this pin set to allow the tool to work on 1970 and later ... more info |
|
Add:
|
FINAL DRIVE SLOTTED NUT TOOL - /2 (1955 to 1969)
Model:
Price: $39.00
Weight: 0.7lbs
Date Added: Friday 19 February, 2010
|
|
For /2's 1955-1969 and R66 R51/2 R51/3 R67 R68 but not R26 R27 Used to remove the nut with the four slots that holds the oil seal and the pinion gear ... more info |
|
Add:
|
DIAL INDICATOR
Model:
Price: $32.00
Weight: 0.5lbs
Date Added: Friday 19 February, 2010
|
|
Used with the crankshaft truing stand, The flywheel runout fixture, and the front end alignment tools. 0.0005” resolution, 1-inch range |
|
Add:
|
SHOCK COMPRESSOR - /2 /5 /6
Model:
Price: $47.00
Weight: 1.3lbs
Date Added: Friday 19 February, 2010
|
|
For disassembling and reassembling the worn shocks on the front of /2 and rear of /5 & /6. Also included is a tool for unscrewing front and rear /2 ... more info |
|
Add:
|
FRONT END ALIGNMENT TOOL - PLATE GLASS
Model:
Price: $25.00
Weight: 1lbs
Date Added: Friday 19 February, 2010
|
|
Plate used to determine if one tube is cocked in front of the other. |
|
Add:
|
STEERING HEAD BEARING PULLER SET - 1970-1995 AIRHEADS
Model:
Price: $119.00
Weight: 4.5lbs
Date Added: Friday 19 February, 2010
|
|
Includes both the outer race and inner race steering head bearing pullers, plus everything you need to reinstall the races in the frame and the ... more info |
|
